ktm3002t Posted September 21, 2019 Report Share Posted September 21, 2019 Hi thete everyone i have ktm exc the fuel tank screw holes have widened up because of taking shourds out went and put a new bigger screw that was slightly longer and went thuru to the inside of the tank has anyone used epoxy glue will it work any suggestions dont really want to go buy new tank Quote Link to comment Share on other sites More sharing options...
ohmygewd Posted September 21, 2019 Report Share Posted September 21, 2019 Dave, you can’t use an epoxy as the fuel will eventually eat into it. You can use a soldering iron and melt/push the existing plastics into the hole making a weld. I’m sure you can get your hands on a plastic welder, use the white plastic rod and melt/weld the hole...no difference to welding up a bumper Quote Link to comment Share on other sites More sharing options...
PeteV Posted September 21, 2019 Report Share Posted September 21, 2019 Or take it to a plastic welder $50 -$100 is better than $350 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.